Sullair fluid filters are designed and engineered specifically for use in rotary screw air compressors while most “will-fit” filters found in the marketplace are designed for the automotive industry.

Which filter would you prefer to use in your Sullair compressor?

What are you trying to protect?

Is it worth the risk?—Spending a few dollars more for a genuine OEM filter costs much less than re-building an expensive compressor unit.

Micro Glass filter media—Superior media that will not swell or blind off like cellulose media.

Seal technology—Seals used are all Viton which is compatible with today’s synthetic fluids.

Extreme efficiency—Greater than 98% efficient at 15 micron. Beta ratings are printed right on the filter.

AIR FILTERS — THE FIRST LINE OF DEFENSE

Air filters are critical to help protect compressors from airborne contaminants. Without a genuine filter in place, dirt builds up in the air end — dragging down machine performance and increasing maintenance costs.

Sullair Optimalair Inlet Filters help promote smoother air flow with substantially less contamination.

• 99.9% Efficiency per ISO 5011
• Catches particles up to 5x smaller compared to substitute products
• Smoother, cleaner air flow helps reduce energy costs, preserve fluid and extend air end life

Sullube® is a Polyglycol based lubricant that has been the mainstay of the Sullair fluid family for over 25 years. Sullube® has performed flawlessly in over 50,000 compressors for more than 150,000,000 hours.

Long life expectancy—Perfect for annual change interval.

Will not form sludge or varnish—Keeps compressor operating clean and efficiently.

Removes existing varnish—Perfect lubricant for removing varnish from compressors running on hydrocarbon fluids.

Cools more efficiently—Excellent at removing heat created by the compression process.

Environmentally considerate—Compressor condensate is biodegradable.

High flash point

Very low carryover—With less than 1 PPM carryover, less top off fluid is needed.

Don’t be fooled by the numerous low cost look alike fluids available in the market today. While many companies claim they provide a “same as” fluid at a lower cost, it simply isn’t the case. Sullair fluids are highly engineered to provide optimum performance and energy conservation and the “same as” fluids just don’t match up.

PristineFG is Sullair food grade lubricant designed to significantly outperform other food grade fluids in the market. It currently meets incidental contact approval requirements of NSF H1, Halal, Kosher, Pareve, and is registered in Canada.

Maximize compressor life and maintenance costs—With its superior resistance to varnishing, maintenance and downtime cost are significantly reduced.

Longer fluid change out periods—Formulated to operate up to 6000 hours under normal conditions. Used safely in the Food & Beverages industries.

Reduced lubricant consumption—Low volatility means lower carry over for less top off fluid.

Wide range of operating temperatures—Formulated to lubricate well at either high or low temperatures.

Don’t be fooled by the numerous low cost look alike fluids available in the market today. While many companies claim they provide a “same as” fluid at a lower cost, it simply isn’t the case. Sullair fluids are highly engineered to provide optimum performance and energy conservation and the “same as” fluids just don’t match up.

AWF®, which stands for “All Weather Fluid”, is one of the only fluids in the industry formulated specifically for use in portable air compressors.

Longer fluid life—Under normal conditions, AWF® has a change interval of 1500 hours as compared to 300 – 500 for competitive products.

Multiviscosity—As All Weather Fluid indicates, AWF® will operate in extreme cold as well as extreme hot conditions.

Oxidation resistant—Highly resistant to varnishing when operated for long periods of time in hot conditions.

Water separation—With a superior tolerance for water, AWF® allows easy separation during the day to day operation in humid climates.

5 year warranty—The compressor unit will have a 5 year warranty as long as it continues to operate with AWF® and the fluid is changed annually.

Don’t be fooled by the numerous low cost look alike fluids available in the market today. While many companies claim they provide a “same as” fluid at a lower cost, it simply isn’t the case. Sullair fluids are highly engineered to provide optimum performance and energy conservation and the “same as” fluids just don’t match up.

SRF1/4000® is a highly refined, hydro-treated petroleum base fluid designed for the one year or 4000 hours of operation. It is currently the factory fill for all Sullair rotary screw vacuum systems.

Annual change interval—Designed to operate one year or 4000 hours under normal operating conditions, guaranteed.

Highly refined—As the result of the hydro-treated process, SRF® is very resistant to breakdown and varnish.

Reduced maintenance—Less downtime and labor than standard mineral-based fluids.

High viscosity index—Viscosity stays very stable at low and high temperatures.

Don’t be fooled by the numerous low cost look alike fluids available in the market today. While many companies claim they provide a “same as” fluid at a lower cost, it simply isn’t the case. Sullair fluids are highly engineered to provide optimum performance and energy conservation and the “same as” fluids just don’t match up.

HPL 1500 is a fluid in the Sullair family of fluids designed specifically for high pressure (300 – 500 psig) portable compressors.

Longer life—Under normal conditions, HPL 1500 has a change interval of 1500 hours as compared to 300 – 800 for most competitive products, significantly reducing downtime maintenance costs.

Testing—HPL 1500 was subjected to a rigorous battery of testing over a 2 year period of time and passed every test with flying colors.

Compatibility—HPL 1500 is compatible with any high pressure portable no matter what make. You only need to stock one fluid to maintain your fleet of compressors.

Multiviscosity—HPL 1500 is a highly refined synthetic hydrocarbon fluid formulated to allow easier cold weather starting while providing exceptional lubrication in extreme hot or cold service.

5 year warranty—The compressor unit will have a 5 year warranty as long as it continues to operate with HPL 1500 and the fluid is changed annually.

Don’t be fooled by the numerous low cost look alike fluids available in the market today. While many companies claim they provide a “same as” fluid at a lower cost, it simply isn’t the case. Sullair fluids are highly engineered to provide optimum performance and energy conservation and the “same as” fluids just don’t match up.

PREVENTIVE MAINTENANCE USING OIL SAMPLING
Compressor fluid is the lifeblood of your compressor. Regular oil testing can help you manage compressor maintenance and optimize performance by identifying abnormal wear or contamination.

A robust preventive maintenance plan can help:

• Increase ROI tenfold
• Reduce breakdowns by 70%
• Reduce downtime by 35 – 45%
• Reduce maintenance-related costs by 25 – 30%

You or your local Authorized Sullair Distributor can obtain a fluid sample using a testing kit.

Source: Report from US Department of Energy

With the cost of compressor fluids these days, the goal of any compressor manufacturer is using an air/oil separator that keeps this fluid in the compressor. The Sullair Optimizer separators are all designed with extremely low carryover in mind.

Low carryover — At 1 to 2 PPM, significantly reduces the amount of make-up fluid required, saving on maintenance costs.

Low differential pressure — Low pressure drop means more energy efficiency which saves money.

Pleated Micro Glass media — Provides more surface area so element lasts longer than conventional wrapped designs.

Peace of mind — Guaranteed to perform for 1 year or 8000 hours under normal conditions.

When your compressor’s production life has come to an end, it’s time to consider a replacement—and Sullair Certified REMAN Air End program. The Sullair air end is remanufactured to factory specifications and, throughout the process, you will receive the latest technological improvements for your system. 

By choosing Sullair Certified REMAN Air End program, you are choosing quality and confidence that you will receive the performance and longevity that you’ve come to expect from your Sullair compressor.